by Peter Wilson
Earth's Effect On Weather Formation
Weather formation is a very complex process, involving the sun, the Earth's atmosphere and the rotation of the Earth. But there is one more item to add to the list of ingredients responsible for changing weather patterns. This last piece of the puzzle is none other than good old terra firma.
Yes, the unique combination of land and ocean that makes up the Earth has significant effect on weather patterns, temperature and precipitation, on a large scale and on a local scale. The water of the oceans and lakes, as well as the huge masses of land, warm with the sun and cool. The effect caused by water and by land is different, though, because large water surfaces absorb heat slowly and release it just as slowly. Land, for the most part however, warms up quickly and cools just as quickly.
One of the basic differences, then, is in temperature, when weather in coastal areas is compared with climate conditions over the same amount of land surface away from the sea. As most experienced weather watchers know, and as meteorologists report, clouds form over land more readily due to heating of a landmass during the daytime. This can lead to widespread convection. (Of course, the peculiarities of land and water also play a huge role in wind formation, from monsoons to sea breezes).
The ongoing interaction between a weather system and the land below can make changes in that system. A good example is the hurricane, a powerful and massive storm that can destroy man-made and natural structures but can lose intensity when it encounters land, especially a rise in elevation on that land. Mountain ranges can make major changes in a weather systems. For instance, a system of low pressure that approaches a mountainous area is forced to move up and spread out. Any air mass rotation is slowed down by this contact. Though the area of low pressure can regain some speed and strength but generally is never as strong as before.
Mountains are also a key catalyst for what is known as "rain shadow." As described before, an air mass moving into a mountainous area will move upward, triggering condensation. After this initial contact, clouds form and precipitation, as rain or snow, can start. Meteorologists know that the precipitation will primarily reach the ground on the side of the mountains from which the air mass approached. Those living things on what is often known as the "lee" side of the mountain receive less precipitation because the air mass falls to a lower level, warms up and becomes dry. The "lee" side of the mountain range experiences the rain shadow. In fact, east of the Rockies, an area often called high plains in the central U.S. is a classic rain shadow landscape. If the effect continues for a long enough period of time, a desert can be the result.
Discussions of weather should include terms such as atmosphere, clouds, water vapor, wind direction and so on. But these discussions should include the Earth as well.
About the Author
Peter Wilson repeatedly edits detailed reports on subjects similar to weather patterns and temperature. You might come across his work on weather forecast for alicante and weather patterns here.
Minggu, 06 Januari 2008
High Voltage Transformers for Tesla Coils
by P. Graham
If you are building a small Tesla Coil there is only a few choices when it comes to the supply. The first would be the Neon Sign Transformer. NSTs as they are commonly known have an output of 5KV to 15KV and around 30mA. They are easy to find and really aren't that expensive to buy. The 15KV, 30mA NSTs are prefered as they have a power output of around 450W. WARNING: NSTs often have the case connected to the centre tap of the secondary, this means the case has half the output voltage of the NST. A simple Jacobs ladder can be constructed using a NST and some Stiff bare wire. Just don't Run the NST for too long arcing this way as an arc provides close to a short circuit and you may damage the NST.
Another choice is the Microwave Transformer. The out put of these is around 2KV with around 500mA output. Parts to build a Tesla Coil can be obtained cheaply with a 2KV rating so they are an attractive prospect. There are two draw backs with Microwave Transformers the first is the fact you have to have your circuit transform 2KV up to 200KV+, the other draw back is the high current. Microwave Transformers can deliver 500mA+ any current above 30mA CAN BE LETHAL. Also take care when dismantaling Microwaves as there is a 2000 volt Capacitor inside them they may still contain enough charge to be lethal.
For large Tesla Coils One can parrallel the above Transformers or find an industrial HV Transformer. One example would be an induction hardening Transformer. Huge Power usually three phase.
Another example would be a pole Pig. These are a step down transformer from a higher voltage down to domestic supply. With these the domestic supply voltage is fed into the secondary which is the low voltage side of the transformer. The primary will exibit a voltage similar to that which is fed into it on the pole. The very last option for a HV Transformer is to wind your own. This may take more effort than it is worth but some builders prefer to build all of their own components. Much planning and understanding of transformer theory is needed to obtain good results. Everything needs to be considered it is more than just the turns ratio.
Warning: Care must be taken when ever working around any voltage capable of causing n electric shock. If You are planning to experiment with High Voltage please take care. It is a good idea to find someone experienced with HV.
About the Author
Amateur Radio Operator in VK (Australia) HV Enthusiast.
If you are building a small Tesla Coil there is only a few choices when it comes to the supply. The first would be the Neon Sign Transformer. NSTs as they are commonly known have an output of 5KV to 15KV and around 30mA. They are easy to find and really aren't that expensive to buy. The 15KV, 30mA NSTs are prefered as they have a power output of around 450W. WARNING: NSTs often have the case connected to the centre tap of the secondary, this means the case has half the output voltage of the NST. A simple Jacobs ladder can be constructed using a NST and some Stiff bare wire. Just don't Run the NST for too long arcing this way as an arc provides close to a short circuit and you may damage the NST.
Another choice is the Microwave Transformer. The out put of these is around 2KV with around 500mA output. Parts to build a Tesla Coil can be obtained cheaply with a 2KV rating so they are an attractive prospect. There are two draw backs with Microwave Transformers the first is the fact you have to have your circuit transform 2KV up to 200KV+, the other draw back is the high current. Microwave Transformers can deliver 500mA+ any current above 30mA CAN BE LETHAL. Also take care when dismantaling Microwaves as there is a 2000 volt Capacitor inside them they may still contain enough charge to be lethal.
For large Tesla Coils One can parrallel the above Transformers or find an industrial HV Transformer. One example would be an induction hardening Transformer. Huge Power usually three phase.
Another example would be a pole Pig. These are a step down transformer from a higher voltage down to domestic supply. With these the domestic supply voltage is fed into the secondary which is the low voltage side of the transformer. The primary will exibit a voltage similar to that which is fed into it on the pole. The very last option for a HV Transformer is to wind your own. This may take more effort than it is worth but some builders prefer to build all of their own components. Much planning and understanding of transformer theory is needed to obtain good results. Everything needs to be considered it is more than just the turns ratio.
Warning: Care must be taken when ever working around any voltage capable of causing n electric shock. If You are planning to experiment with High Voltage please take care. It is a good idea to find someone experienced with HV.
About the Author
Amateur Radio Operator in VK (Australia) HV Enthusiast.
Sabtu, 05 Januari 2008
Consider The Options Before Borrowing Money To Support Your Education
by Don Alexander
If you are thinking for borrowing money to support your education, try to ask yourself first if you have savings left that you can use instead of taking out a student loan from the school of your choice. Also, think if you can get by with less by way of holding down expenses, or if you can do something great, like working more, either in the academic year or during vacations just to support your education.
Also, think for the possible scholarships that you can apply for, or you can be qualified for. There are actually a lot of options left for you out there. The best move to take now is to know and understand them.
Estimate Your Loan Payments
It is worthy to note that the more you borrow for your education, the higher is the amount of your monthly repayments will be once you finish your degree. So if possible, try to estimate your loan payments. There are a number of student loan repayment calculators out there that you can use to do the math. What's more, you have the chance to calculate your monthly payments based on the estimated starting salary of your chosen occupation.
The Essential Borrowing Tips Now that you have pondered enough about your student loan with the things you have to consider before borrowing, as well as with the amount you need to borrow, I guess it is now important for you to look at the most recommended tips for borrowing student loans.
Just consider the following:
1. Start by looking at the award letter given to you by your servicer. From the letter, figure out which need-based loans you have been qualifies for and for what amounts.
2. After looking at the full financial picture, such as the awarded aid, education cost, and family share, you should then consider settling on an amount that you actually need to borrow.
3. The rule is: never borrow more than you need. Always note that as a student loan borrower, you are not required to take the full amount of the loan you have been offered.
4. Don't ever forget about student employment as an alternative for borrowing. Even though working at a job can seem like an extra burden for students, so is struggling with high loan repayments after college.
5. Apply for the student loan right away. This is very necessary especially if you want to ensure that the loan is approved as well as the money paid to the college before you have to make your first student account payment.
6. The key to successful application is to follow the loan application instructions carefully. Note that any mistakes you make will delay receipt of the funds.
7. When you are applying for a Stafford or Direct student loan, be prepared for the amount that is paid to the college to be less than the amount you signed for. Usually, a fee of up to four percent will be deducted from the student loan. This deduction occurs before the check is sent to the college of your choice.
8. If you already figured out the exact amount you are borrowing before any borrowing process begins, you should start keeping track of your student loan tab, which is what your monthly repayment amount will be after you graduated from college. There are student loan calculators out there than can do the math for you.
9. If instances occur that you find yourself needing more than the amount that's been offered in your award letter, it is necessary to contact with a financial aid counselor before taking on an additional loan.
10. And, if you do take on an additional, unsubsidized loan, just consider making interest payments while attending your degree. The interest won't be much and this will help you save money. If you delay or capitalize the interest payments, you will end up having to pay back significantly less than.
Also, after leaving college considering purchasing a home instead of getting an apartment. My wife and I fortunately did this a few years after we left school, and we were able to pay back my $26,500 student loan with a simple refinance that also lowered our mortgage payments. We were able to do that within 8 months of purchasing the home! What a relief it still is to this day knowing that my education has already been paid back in full!
As mentioned, planning and thinking your moves for taking out student loans is very necessary for a successful borrowing. If you do consider what have been mentioned above, then there is no doubt for you not to attain your dream education, and even a successful career in the future.
About the Author
Don Alexander is owner of leading-online-business.com and writes on a variety of subjects. To learn more about this topic Don recommends you visit http://www.leading-online-business.com
If you are thinking for borrowing money to support your education, try to ask yourself first if you have savings left that you can use instead of taking out a student loan from the school of your choice. Also, think if you can get by with less by way of holding down expenses, or if you can do something great, like working more, either in the academic year or during vacations just to support your education.
Also, think for the possible scholarships that you can apply for, or you can be qualified for. There are actually a lot of options left for you out there. The best move to take now is to know and understand them.
Estimate Your Loan Payments
It is worthy to note that the more you borrow for your education, the higher is the amount of your monthly repayments will be once you finish your degree. So if possible, try to estimate your loan payments. There are a number of student loan repayment calculators out there that you can use to do the math. What's more, you have the chance to calculate your monthly payments based on the estimated starting salary of your chosen occupation.
The Essential Borrowing Tips Now that you have pondered enough about your student loan with the things you have to consider before borrowing, as well as with the amount you need to borrow, I guess it is now important for you to look at the most recommended tips for borrowing student loans.
Just consider the following:
1. Start by looking at the award letter given to you by your servicer. From the letter, figure out which need-based loans you have been qualifies for and for what amounts.
2. After looking at the full financial picture, such as the awarded aid, education cost, and family share, you should then consider settling on an amount that you actually need to borrow.
3. The rule is: never borrow more than you need. Always note that as a student loan borrower, you are not required to take the full amount of the loan you have been offered.
4. Don't ever forget about student employment as an alternative for borrowing. Even though working at a job can seem like an extra burden for students, so is struggling with high loan repayments after college.
5. Apply for the student loan right away. This is very necessary especially if you want to ensure that the loan is approved as well as the money paid to the college before you have to make your first student account payment.
6. The key to successful application is to follow the loan application instructions carefully. Note that any mistakes you make will delay receipt of the funds.
7. When you are applying for a Stafford or Direct student loan, be prepared for the amount that is paid to the college to be less than the amount you signed for. Usually, a fee of up to four percent will be deducted from the student loan. This deduction occurs before the check is sent to the college of your choice.
8. If you already figured out the exact amount you are borrowing before any borrowing process begins, you should start keeping track of your student loan tab, which is what your monthly repayment amount will be after you graduated from college. There are student loan calculators out there than can do the math for you.
9. If instances occur that you find yourself needing more than the amount that's been offered in your award letter, it is necessary to contact with a financial aid counselor before taking on an additional loan.
10. And, if you do take on an additional, unsubsidized loan, just consider making interest payments while attending your degree. The interest won't be much and this will help you save money. If you delay or capitalize the interest payments, you will end up having to pay back significantly less than.
Also, after leaving college considering purchasing a home instead of getting an apartment. My wife and I fortunately did this a few years after we left school, and we were able to pay back my $26,500 student loan with a simple refinance that also lowered our mortgage payments. We were able to do that within 8 months of purchasing the home! What a relief it still is to this day knowing that my education has already been paid back in full!
As mentioned, planning and thinking your moves for taking out student loans is very necessary for a successful borrowing. If you do consider what have been mentioned above, then there is no doubt for you not to attain your dream education, and even a successful career in the future.
About the Author
Don Alexander is owner of leading-online-business.com and writes on a variety of subjects. To learn more about this topic Don recommends you visit http://www.leading-online-business.com
Langganan:
Postingan (Atom)